ZINSSER BIN TURBO Stain Blocking Primer and Odor Sealant Spray / 0.75L 0.75 kg

The ZINSSER® TURBO SPRAY SYSTEM™ creates a fan-shaped spray up to 25 cm wide, providing up to 4 times greater coverage in the same amount of time compared to traditional spray primers. B-I-N® is ideal for new construction, water, fire, and smoke damage, renovations, and restorations. B-I-N® adheres to all surfaces, including ceramic tiles and glass. It is suitable for all interior surfaces made of wood, concrete, drywall, and ungalvanized metal. Heavily charred substrates should be replaced, and crumbling soot and other contaminants should be removed with a dry chemical sponge or brush. Prime damaged surfaces with B-I-N® to block smoke and water stains and seal unpleasant odors.

• ✅ 4 times greater coverage compared to conventional spray primers
• ✅ Adheres to all surfaces – even ceramic tiles and glass
• ✅ Ideal for new construction, as well as water, fire, and smoke damage
• ✅ Blocks smoke, water, and nicotine stains and odors
• ✅ Fast drying – ready for painting in just 45 minutes

The perfect Zinsser B-I-N® Turbo Spray aerosol priming solution

Why choose it? What is the product?

Zinsser® B-I-N® Turbo Spray is a high-performance shellac-based spray primer that creates a wide spray pattern – up to 25 cm, ensuring much faster and more even application.

It is suitable for:

• repairs and renovations
• restoration after fire, flood, or smoke damage
• interior surfaces requiring maximum adhesion

Suitable for the following surfaces

• wood
• concrete
• drywall
• unglazed metal
• ceramic tiles
• glass

📌 For interior use and localized exterior repairs only.

Key technical characteristics

• Finish: matte
• Gloss (60°): 5%
• Coverage: ~3 m² (depending on the surface)
• Drying time (20°C / 50% humidity)
• Touch dry: 15 minutes
• Ready for recoating: 45 minutes
• Full cure: 1 – 3 days

Instructions for use

1. The surface must be clean, dry, and dust-free
2. Shake the can well until you hear the ball
3. Invert and shake for another 1 minute
4. Spray from 25–30 cm with light, even strokes
5. Can be painted after 45 minutes
6. Important to know

⚠️ Not suitable for:

• ❌ floors
• ❌ high-traffic areas
• ❌ full exterior use

⚠️ Working temperature: 10 – 32°C
⚠️ Humidity: below 85%

Cleaning and maintenance: If the nozzle becomes clogged – remove it and wash with denatured alcohol

For storage: invert the can and spray until only gas comes out

Shelf life:

🕒 Minimum 3 years in unopened packaging, stored in a dry and well-ventilated place, away from direct sunlight.