RUST OLEUM FILLCOAT WATERPROOFING 1L 1.2 kg

RUST OLEUM FILLCOAT® WATERPROOFING 1L

DESCRIPTION

Instantly waterproof elastic paint for roofs, non-walkable terraces, gutters, ridge-pieces, chimney stacks, pipes, etc. The product has better UV resistance and improved hydrophobic properties.

RECOMMENDED USE
Waterproof finish of roofs, non-walkable terraces, gutters, ridge-pieces, chimney stacks, pipes, etc. Product is recoatable with Dacfill, Coating PRT or Dacfill HZ.

TECHNICAL DATA

• Density (g/cm³): 1,01
• Gloss Level: Satin
• Solids Content in weight: 52%
• Solids content in volume: 43%

DRY TIMES BY 20º C/RH 50%

• Touch dry: 4 h
• Dry to recoat: 3 - 14 days with the same product. 6 weeks with a paint
• Fully cured: 3 weeks

RECOMMENDED WET FILM THICKNESS 1000 µm

RECOMMENDED DRY FILM THICKNESS  430 µm

THEORETICAL CONSUMPTION  1 m²/L at 430 µm dry

PRACTICAL CONSUMPTION
Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.

SURFACE PREPARATION
Remove dust, mud, grease, moss and withered leaves carefully. The spots to be repaired are cleaned with a hard broom and sponged. After cleaning, Fillcoat can be applied directly on bituminous substrates, hard PVC, polyester, zinc, aluminium, glass, tiles, etc. Porous materials (concrete, stone, wood) must first be dried and pre-treated with a coat of Primer 44HS. In case of repeatedly repaired spots, important or active cracks, Fillcoat without fibres is to be reinforced with Dacfill-fleece: apply a coat of Fillcoat (about 1 l/m²), unroll Dacfill-fleece in it and cover it immediately with another coat of Fillcoat.

DIRECTIONS FOR USE
To ensure homogeneity, coating materials should be thoroughly stirred prior to use.

APPLICATION CONDITIONS
Can be applied during all weather conditions, except for snow.

APPLICATION & THINNING: BRUSH
Do not dilute.

CLEANING OF EQUIPMENT / SPILLS
Thinner 22 or white spirit.

REMARKS

Never apply to polystyrene insulation or onto new concrete (concrete should be at least 2 years old). Do not apply Fillcoat as priming coat under Dac Hydro Alu.

SAFETY DATA

• VOC level: 485 g/l
• VOC readymix: 485 g/l
• VOC category: A/i
• VOC limit: 500 g/l
• Grenelle: Exterior
• Remarks regarding safety: Consult Safety Data Sheet and Safety Information printed on the can.

SHELF LIFE
Minimum of 5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.

Made by: